06-06-2016 -
PNC Inc. has improved its manufacturing capabilities with the recent purchase of an ECOSELECT 2 Selective wave solder machine manufactured by Ersa.
05-27-2016 -
PNC's First Even Open House was a Great Success for Vendors, Industry Guests
12/31/2015 -
PNC Purchased
Bench-top AOI / Company Continues to buy Products of the future
09/21/2015 -
Please be our guest at the region's largest Design & Contract. Manufacturing show on Sept. 30th and October 1st @ Royal Plaza Trade Center,181 Boston Post Rd W, Marlborough, MA 01752 Activate your Free VIP Registration here
09/14/2015 -
Please be our guest at the region's largest Design & Contract Manufacturing show on 9/16 and 9/17 @ Monroeville Convention Centre, 209& Mall Blvd. Monroeville, PA. Activate your Free VIP Registration here.
09/10/2014 -
Please join PNC INC for upcoming Design 2 Part show, your VIP invitation the largest Design and contract manufacturing show in the region, Oct 1-2, Royal Plaza Trade Centre, Marlborough, MA , Free registration
05/28/2014 -
Please join PNC INC for upcoming SMTA Midwest Expo and Tech forum, June 18th, 2014 at DoubleTree Bloomington Minneapolis South 7800 Normandale Blvd. Bloomington, MN 55439, Free registration
02/25/2014 -
PNC INC. purchased Vacuum Packaging systems from CII.
02/05/2014 -
PNC Purchased new Horizontal conveyorized CobraBond /In-Line Oxide Replacement line from IPS.
01/08/2014 -
PNC Purchased
ATG A5 NEO Flying probe Fixtureless Test-System with 8 test heads.
01/01/2014 -
PNC Purchased Uitron MR1-24 Camera system with brightfield/Darkfrield Metallograph. This system will be used to analyze our cross sections and coupons
09/18/2013 -
PNC Purchased XRI-369 X-Rite Diazo B/W transmission Densitometer.
08/30/2013 -
PNC INC. is participating in Design Part 2 / Job Shop shows in PA and MA. Please visit us at booth # 346 on Sept. 25 & 26, Phoenixville, PA and at booth # 537 on Oct. 30 & 31, Marlborough, MA.
03/13/2013 -
PNC INC. has been added to Cooper Industries / Eaton Corporation AVL
03/13/2013 -
PNC Inc. is proud to announce its latest UL qualification of polyimide base materials. PNC has partnered with Ventec USA using VT-901 laminate and VT-901PP prepreg.
02/16/2013 -
Join us at "Design part 2 / Job Shop Show", Monroeville, PA on April 17-18, 2013
01/15/2013 -
PNC Purchased primary developer from Schmid Systems Inc.
06/21/2012 -
PNC Purchased DP-1500 2X - V4 from Circuit Automation
02/18/2012 -
Join us at "Job Shop Show", SECAUCUS, NJ on April 11-12, 2012, Booth # 423
01/18/2012 -
Join us at "ATX-Automation Technology Expo", Convention Center, Philadelphia, PA May 22-24, 2012, Booth # 420
01/27/2012 -
PNC Purchased D32 Diazo Photo Tool Developer
01/25/2012 -
PNC Purchased
ATG A1B Flying probe Fixtureless Test-System with 8 test heads
01/18/2012 -
PNC Purchased XRI-369 X-Rite Diazo B/W transmission Densitometer.
01/15/2012 -
PNC Purchased SCIENSCOPE inspection and measurement scope with Micro and Macro Zoom lenses with digital picture capability.
01/10/2012 -
PNC Purchased 547XL-30 Solder Stripper from ETI.
01/07/2012 -
PNC Purchased C-21-CC-50 Board Cleaning Machine with High Pressure Hole Clean from Integrated Process Systems.
11/20/2011 -
PNC Purchased Chemcut 547XL-30 Solder Stripper.
08/18/2011 -
Join us at "Job Shop Show", Marlborough, MA on November 2-3rd, 2011, Booth # 538
03/24/2011 -
PNC Purchased
POST ETCH PUNCH for Multilayer Registration with 4 Cameras from C. A. Picard International.
03/22/2011 -
PNC Purchased
Accu-Score AS-100 MAX with jump scoring capability scoring machine from Accusystems Corp, PA.
03/11/2011 -
PNC Purchased
GIGA8888,, 8 Spindles Drilling machine from Pluritec, Italy
02/25/2011 -
Join us at "ATX-Automation Technology Expo", Jacob Javits Convention Center, New York, NY on JUNE 7-9th, 2011, Booth no 2926
FREE ADMISSION
02/25/2011 -
Join us at "Job Shop Show", Phoenixville, PA on April 13-14 th, 2011, Booth # 354
07/21/2010 -
Join us at "Job Shop Show", Secaucus, NJ on SEPT 28-29th, 2010, Booth # 317
06/18/2010 -
Purchased new Hollmuller etcher from Germany.
05/28/2010 -
Purchased Excellon MK VI Driller/Router
01/18/2010 -
PNC inc. was awarded MIL-PRF-31032A AND MIL-PRF-55110 certifications from DSSC
01/12/2010 -
PNC installed New Legend Printer for direct silk screening from CAMTECH, Israel
12/18/2009 -
PNC installed New Film Plotter from Orbotech, Israel
08/22/2009 -
PNC installed New fully automatic Film Punch from Multiline Technology, NY, USA
04/12/2009 -
Join us at ATX Expo Booth # 3328 ATX EXPO-Jacob Javits Convention Center, NY, NY
04/12/2009 -
PNC installed New Mini Gold Tab Plating Machine Technique Inc
06/21/2008 -
PNC Inc. receives ITAR(International Traffic in Arms Regulations) Registration from the office of Defense Trade Controls Compliance, Compliance and registration Division(CRD). Registration Code: M23036
06/08/2008 -
PNC placed an order for semi-automatic Artwork film punch from Multiline Technology
03/28/2008 -
PNC installed new AOI machine Orin 860 from Camtel-Israel
01/28/2008 -
Implemented live order tracking on pnconline.com.
01/08/2008 -
PNC installed new Deburr machine Checmcut 605 with 500 PSI high pressure ringer and dryer.
12/21/2007 -
PNC completes our latest purchase of 3 Flying Probes from Mania Technology(1-Mania 580 and 2-MPP4504
12/06/2007 -
PNC completes our latest purchase of Costa Mesa, CA based PCB shop Prime Technology.
09/08/2007 -
Join us at
Nepcon East trade show on OCT-30 and 31st, Booth NO. 967 at Boston Convention Center
08/11/2007 -
New RohS line for Tin finish was installed
07/11/2007 -
New RoHs line for Lead Free HOT Air Level installed.
09/11/2006 -
New RoHs line for Immersion Silver/GOLD and OSP surface finish was installed
06/16/2005 -
PNC installed new Flying probe electrical Testing machine Probe / Probot 880 from Mania Technologies
08/12/2002 -
SBA awarded Small Disadvantaged Business / Minority owned Business Certification, SBD Track # WA00001-0008667 EXP 04/16/2005
08/02/2002 -
New international sales and Marketing office opened in Schaumburg, Il.
08/08/2001 -
New CNC Router-4 Spindles from Wessels, Germany was successfully installed
04/30/2001 -
Placed an order for New CNC Driller-6 Spindles and CNC Routers-4 Spindles from Wessels, Germany
07/03/2001 -
New CNC Driller-6 Spindles from Wessels, Germany was successfully installed.
07/03/2001 -
New CNC Driller-6 Spindles from Wessels, Germany was successfully installed.
05/03/2001 -
Nepcon, PA Exhibition, Booth 404, at Ft. Washington, PA
12/31/2000 -
New Flying Prob ATG-3 installed.
11/30/2000 -
PNC was awarded ISO9002 Registration from BSI
12/01/1998 -
PNC placed an order to buy it's second AOI from CAMTEK, Ltd. It will be installed in second week of January 1999
08/15/1998 -
PNC Installed its Conveyerised "Ultra-Plate" direct metallization line from Fidelity Chemicals.
